主な仕様
- バンド
- 160m–10m (HF including WARC)
- 出力
- ~100W SSB/CW
- 周波数範囲
- Tx/Rx 1.8–29.7 MHz (ham bands only)
- 受信部
- Double-conversion superheterodyne
- 希望小売価格 (USD)
- $350–550 (vintage market)
- タイプ
- vintage hf
日本市場で探す
Buyee経由でYahoo!オークションなど日本の出品からKenwood TS-830Sを検索。
Buyee.jpへの外部リンク（第三者の代理購入サービス）。
The Kenwood TS-830S taught a generation of HF operators what "Kenwood audio" means. Introduced in the late 1970s as successor to the TS-820S, the 830S combined analog VFO ergonomics, 6146B tube finals, and WARC band coverage in a chassis that served club stations and home shacks worldwide. Decades later, restored units remain on daily nets — prized for warm phone transmit quality, straightforward serviceability, and an operating experience modern touchscreen rigs cannot replicate.
Overview
Kenwood designed the TS-830S for SSB and CW across 160 through 10 meters, including WARC bands. Unlike general-coverage competitors, it focuses exclusively on amateur allocations. Factory configurations often blocked WARC transmit until operators removed blocking diodes — a well-documented modification enabling full band coverage.
The transmitter uses a pair of 6146B tubes fed by solid-state drivers. Rated input is 220 watts PEP SSB and 180 watts DC CW, yielding roughly 100 watts RF output. This hybrid architecture defines the TS-830S sonic character: rich, present phone audio that rewards proper alignment and a matched antenna.
Receiver architecture is double-conversion superheterodyne with IF stages at 8.83 MHz and 455 kHz. Sensitivity is 0.25 µV for 10 dB S+N/N. Variable Bandwidth Tuning adjusts selectivity between approximately 500 Hz and 2.4 kHz on SSB. IF shift, notch filtering, noise blanker, RIT/XIT, and a 25 kHz calibrator complete the feature set.
The TS-830S requires mains AC — typically 120 VAC at 50/60 Hz. At 333 × 133 × 333 mm and 13.5 kg, it reflects late-1970s tube-final construction. Alongside Icom's IC-751A and Yaesu's FT-101, the 830S anchors Kenwood's vintage reputation.
Specifications
| Specification | Detail |
|---|---|
| Frequency coverage (Tx/Rx) | 1.8–2.0, 3.5–4.0, 7.0–7.3, 10.1–10.15 (10.0 MHz WWV), 14.0–14.35, 18.068–18.168, 21.0–21.45, 24.89–24.99, 28.0–29.7 MHz |
| Modes | SSB, CW |
| Output power | ~100W (220W PEP SSB input, 180W DC CW input) |
| Final amplifier | Pair of 6146B tubes |
| Receiver architecture | Double-conversion superheterodyne |
| IF frequencies | 8.83 MHz, 455 kHz |
| Sensitivity | 0.25 µV (10 dB S+N/N) |
| Selectivity (SSB wide) | 2.4 kHz (−6 dB), 3.6 kHz (−60 dB) |
| Variable bandwidth | 500 Hz–2.4 kHz continuously variable (SSB) |
| Frequency stability | ±1 kHz first hour; ±100 Hz per 30 minutes after warmup |
| Memory channels | None (analog VFO) |
| Antenna tuner | External (e.g., Kenwood AT-230) |
| Power supply | 120/220/240 V AC, 50/60 Hz |
| Power consumption | Rx 32W (heaters off), Tx 295W max |
| Dimensions | 333 × 133 × 333 mm (13.1 × 5.2 × 13.1 in) |
| Weight | 13.5 kg (29.8 lb) |
Operating Notes
Allow warmup time before critical net check-ins — tube finals and oscillators stabilize after a minute or more, and drift during the first hour is normal. The analog VFO rewards operators who learn each band's layout.
Transmit audio is the TS-830S calling card. Modest mic gain and careful ALC monitoring produce warmth without splatter. Maintenance is non-negotiable: recapping, switch cleaning, and alignment are expected before daily service. See restoring vintage Icom and Kenwood for recap discipline and common failure modes.
There is no general-coverage receive and no built-in tuner. Plan for a resonant antenna or external matcher. Rear-panel IF output supports panadapters for visual band awareness.
Who It's For
The TS-830S suits HF phone and CW operators prioritizing transmit audio, hams comfortable with AC base-station operation, and vintage collectors seeking strong Kenwood community support. Club stations and net controllers often choose it specifically for how it sounds on air.
It is less ideal for digital-mode-heavy stations, portable operation, or buyers unwilling to invest in restoration. Compare vintage value against a used Icom IC-7300 — the 830S wins on audio heritage; modern rigs win on features. Budget restoration alongside purchase per vintage Japanese radio values in 2026. For brand context, read Yaesu vs Icom vs Kenwood and collecting vintage Japanese radios.
Related Reading
- Icom IC-751A — Icom's late-1980s vintage HF rival with synthesized all-mode coverage
- Yaesu FT-101 — early-1970s hybrid design that defined Yaesu's vintage legacy
- Icom IC-7300 — modern HF reference for vintage-versus-used comparison
- Restoring vintage Icom and Kenwood — recap, alignment, and TS-830S failure modes
- Vintage Japanese radio values in 2026 — TS-830S market pricing and condition tiers
- Kenwood brand page — full Kenwood coverage on Japan Radio Guide
Japan's electronics industry shaped global amateur radio for decades — a heritage that extends beyond transceivers into broader cultural exports covered at e2japan.com.